SATO CT4-LX User Manual

393
• To apply only an RFID tag model to the product
[Interface] > [RFID] > [RFID Tag Model] > [Load] Menu
• To apply an RFID tag model and other media settings to the product
[Tools] > [Media Startup] Menu
• To register an RFID tag model and other media settings to the product as a profile
[Tools] > [Media Profiles Editing] > [Media Profiles Registration] Menu
This topic explains the procedure for reading RFID tag models from the [RFID Tag Model] > [Load]
menu.
1. Tap [SRA Setting] on the Home screen.
• You can also access the SRA settings from the [Interface] > [RFID] menu in the
Settings mode.
2. Tap [RFID Tag Model].

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz