SATO CT4-LX - Page 411

411
Setting Item Initial Value User Reset/
Factory Reset
[Port1] 1024 Yes
[Port2] 1025 Yes
[Port3] 9100 Yes
[Flow Control] STATUS4 ENQ Yes
[TCP Connection Queue] Enabled Yes
[Legacy Status for Port 9100] Disabled Yes
[BCC] Disabled Yes
[Delay Reply ENQ] 0 ms Yes
[Status4 Cyclic Response] 500 ms Yes
[Proxy (LAN)]
[Enabled] Disabled Yes
[Server] - Yes
[Exclude] - Yes
• [Network] > [Services] > [NTP]/[LPD]/[FTP]/[SNMP]
Setting Item Initial Value User Reset/
Factory Reset
[NTP]
[Enable] Disabled No/Yes
[Error] Disabled No/Yes
[Time Server IP] 0.0.0.0 No/Yes
[LPD]
[Enable] Enabled Yes
[DNS Lookup] Disabled Yes
[FTP]
[Enable] Disabled Yes
[FTP Timeout] 300 sec Yes
[SNMP]