SATO CT4-LX - Page 415

415
Setting Item Initial Value User Reset/
Factory Reset
[Periodic] Off Yes
• [RS-232C]/[USB]/[NFC]/[Ignore CR/LF]/[Ignore CAN/DLE]
Setting Item Initial Value User Reset/
Factory Reset
[RS-232C]
[Baudrate] 115200 Yes
[Parameters] 8-N-1 Yes
[Flow Control] STATUS4 Yes
[BCC] Disabled Yes
[USB]
[Flow Control] STATUS4 Yes
[BCC] Disabled Yes
[Change USB Serial] Disabled No/Yes
[NFC]
[I/F Enable] Enabled Yes
[Ignore CR/LF] Disabled Yes
[Ignore CAN/DLE] Disabled Yes
• [RFID]
Setting Item Initial Value User Reset/
Factory
Reset
[Antenna Position] Normal Yes
[Write Power] 15 dBm Yes
[Read Power] 15 dBm Yes
[Tag Offset]
[Tag Offset] 0 mm Yes
[Encoding Action] Normal Action Yes