421
Setting Item Initial Value User Reset/
Factory Reset
[Feedback Character] Commands Yes
[SOH Commands] Commands Yes
[Module Selection] Commands Yes
[Darkness] Commands -
[Factory Offset] Commands -
[Speed] Commands -
[Format Attribute] XOR Yes
[Pause Mode] Disabled Yes
[1 Byte Codepage] CP 850 Yes
[SDPL Measure Unit] " Yes
[Scalable Font Style]
[Bold] Disabled Yes
[Italic] Disabled Yes
[Feedback Character] Enabled Yes
[SOH Commands]
[All Commands] Enabled Yes
[SOH-B Command] Enabled Yes
[SOH-C Command] Enabled Yes
[Others] Enabled Yes
[Module Selection] A Yes
[SEPL]
[Home Reference]
[Horz. Offset] 0 dot Yes
[Vert. Offset] 0 dot Yes
[Label Rotation] 0 degree Yes
[Memory Device] Internal FLASH Yes
[Sim. 300 DPI Head] Disabled Yes
To Next Page
Loading...
