Name: SATO CT4-LX
Brand: SATO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

[Wi-Fi] Menu

430

Setting Item Initial Value User Reset/

Factory

Reset

[Wi-Fi Setting]

[IPv4 (Wi-Fi)]

[Mode] DHCP Yes

[DHCP] - -

[IP Address] 0.0.0.0 Yes

[Netmask] 255.255.255.0 Yes

[Gateway] 0.0.0.0 Yes

[DNS] 0.0.0.0, 0.0.0.0, 0.0.0.0 Yes

[IPv6 (Wi-Fi)]

[Mode] Disable Yes

[DHCP] - -

[IP Address] :: Yes

[Prefix Length] 64 Yes

[Gateway] :: Yes

[DNS] :: Yes

[Ports (Wi-Fi)]

[Port1] 1024 Yes

[Port2] 1025 Yes

[Port3] 9100 Yes

[Flow Control] STATUS4 ENQ Yes

[TCP Connection Queue] Enabled Yes

[Legacy Status for Port 9100] Disabled Yes

[BCC] Disabled Yes

[Delay Reply ENQ] 0 ms Yes

[Status4 Cyclic Response] 500 ms Yes

[Proxy (Wi-Fi)]

[Enabled] Disabled Yes

Questions and Answers:

Need help?

Do you have a question about the SATO CT4-LX and is the answer not in the manual?

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz