Name: SATO CT4-LX
Brand: SATO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cleaning the Inside of the Product

436

4. Clean the sensor (3) by using an air duster.

5. Use a cotton swab or cotton cloth dampened with cleaning liquid to wipe the print

head (4).

• The print head and its surroundings are hot after printing. Wait until the product cools

down.

• Touching the edge of the print head with your bare hand could cause injury.

6. On the combined direct thermal/thermal transfer model, clean the ribbon route.

Questions and Answers:

Need help?

Do you have a question about the SATO CT4-LX and is the answer not in the manual?

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz