SATO CT4-LX User Manual

494
Error Message 1073 (RFID Undetected Warning)
When there is an error with the product, the error message appears on the screen.
Tap the error number button to show the details screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Tap [CANCEL].
Cause and Countermeasure Reference
Cause
A print job that does not have an RFID
command was transmitted for RFID tags while
[RFID Undetected Warning] was enabled.
Countermeasure
◦ Add an RFID issue command to the print
job.
◦ Disable [RFID Undetected Warning].
◦ Replace with normal media.
RFID Undetected Warning
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz