SATO CT4-LX User Manual

512
Error Message 1134 (RFID Module Overheated)
When there is an error with the product, the error message appears on the screen.
Tap the error number button to show the details screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Stop operation of the product for 15 minutes to let the temperature decrease.
Cause and Countermeasure Reference
Cause
The temperature of the RFID module has exceeded its
tolerance value.
Countermeasure
Stop operation of the product for 15 minutes to let the
temperature decrease.
Contact Information for When
You Are in Trouble

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz