SATO CT4-LX - Print

517
Print
Item Description
Print Method Direct thermal, combined direct thermal/thermal transfer
Print Speed
203dpi
2 to 8 inches/sec (50.8 to 203.2 mm/sec)
305dpi
2 to 6 inches/sec (50.8 to 152.4 mm/sec)
Linerless Cutter Mode
2 to 4 inches/sec (50.8 to 101.6 mm/sec)
Resolution (Head Density)
• 203 dpi (8 dots/mm)
• 305 dpi (12 dots/mm)
Non-printable Area Pitch direction (Excludes liner)
Top
1.5 mm (0.06")
Linerless label: 5 mm (0.20")
Bottom
1.5 mm (0.06")
Width direction (Excludes liner)
Left
1.5 mm (0.06")
Right
1.5 mm (0.06")
Printable Area
203dpi
Length 2,500 mm (98.43") x Width 104 mm (4.09")
305dpi
Length 1,500 mm (59.06") x Width 104 mm (4.09")
Print End Position
203 dpi (1 dot = 0.125 mm (0.0049"))
0 to 20,000 dots (2,500 mm (98.43"))
305 dpi (1 dot = 0.083 mm (0.0033"))
0 to 18,000 dots (1,500 mm (59.06"))
Print darkness
Darkness level
1 to 10