SATO CT4-LX User Manual

Usable Media
532
Item Description
Media Length 25 to 100 mm (0.98" to 3.94")
Media Width 25 to 110 mm (0.98" to 4.33")
Size (Non-Adhesive Type)
• Continuous
Item Description
Media Length 10 to 399 mm (0.39" to 15.71")
RFID tag: 25 to 399 mm (0.98" to 15.71")
Media Width 25 to 118 mm (0.98" to 4.65")
• Tear-Off
Item Description
Media Length 25 to 399 mm (0.98" to 15.71")
RFID tag: Same as above
Media Width 25 to 118 mm (0.98" to 4.65")
• Cutter
Item Description
Media Length 20 to 399 mm (0.79" to 15.71")
RFID tag: 25 to 399 mm (0.98" to 15.71")
Media Width 25 to 118 mm (0.98" to 4.65")
• The usable media sizes, the output speed, and print quality vary depending on the
media specifications, media and ribbon combination, product settings and output
environment. It is recommended to perform a test print with the media and ribbon to be
used in advance.
Roll Diameter (Media Roll)
• Media roll
Maximum φ128 mm (φ5.0")
• Rolls of wristbands
Maximum φ115 mm (φ4.5")

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz