Powering On the Product
78
• When you power on the product for the first time after purchase or reboot after
resetting the settings, the startup guide appears. You can easily set the printing
preferences on the product by following the on-screen instructions.
• The screen that appears after you power on the product varies depending on the
settings.
◦ If [Start Online] in the [Printing] menu is disabled, the Offline screen appears.
◦ If [AEP] in the [Standalone] menu is enabled, the Home screen or the application
screen appears, depending on the [Initial Display at Start-Up] setting.
• You can power on/off the product from the main power source that supplies the product
with power by enabling [Start on AC] on the [System] menu.
To Next Page
Loading...
