Shimadzu GC-2014 - File Management; Screen Description; PF Menu

95
8 Setting the Analytical Parameters and File Management
8.2
8.
GC-2014
8.2File Management
8.2.1 Screen description
Select [File] (PF menu) from the [SYSTEM] key main screen to display the file list shown in
Fig. 8.2.1.
To change the current file, enter a file No. or move the cursor using the [ △ ] and [ ▽ ] key;
then press the [Load] (PF menu) key.
8.2.2 PF menu
Fig. 8.2.1 File list screen
PF menu Description
Reference
section
Load Selects the current file.
――
Copy Copies file name and file contents from the source file to a destination file. 8.2.3
File Init
Initializes file name and file contents.
The current file cannot be initialized.
8.2.5
Rename Changes the file name. 8.2.4