Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.1 Time Scheduler
213
GC-2014
16.1.4 Editing a time schedule
Select “2. EDIT” from the time scheduler menu to display the schedule number or the day of
the week setup screen shown in Fig. 16.1.3. Before editing a schedule, select the schedule
number or the day of the week, and press [Edit] (PF menu). Then, the schedule edit screen
shown in Fig. 16.1.4 appears.
You do not have to set schedules in the order of execution time. After editing time schedules,
they are automatically sorted. More than one schedule can be set to the same time. These
schedules will be executed at the same time.
16.1.5 PF menu
Fig. 16.1.3 Schedule number selection screen Fig. 16.1.4 Schedule edit screen
PF menu Description
Reference
section
New Creates a new time schedule. 16.1.6
Del Line Deletes a schedule line at the current cursor position.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)