14 Diagnosis
14.2 Log Reading Menu
187
GC-2014
14.2.7 Diagnostic log
When “5. DIAGNOSTIC LOG” is selected, the resulst of the standard diagnosis are
displayed. The results of the last diagnosis are shown in the [Details] (PF menu) screen
described in “14.1 Standard Diagnosis”.
(1) Screen description
Select “2. LOG READING MENU” from of the [DIAG] key main screen, then select “5.
DIAGNOSTIC LOG”. The screen shown in Fig. 14.2.7 appears.
Up to 50 logs are saved. If the number of logs exceeds 50, existing logs are deleted
starting from the oldest.
If there are more items than items than can be displayed on one screen, scroll through the screen
using the left and right arrow keys.
(2) PF menu
Fig. 14.2.7 Diagnosis log screen
PF menu Description
Reference
section
Clear Log
Deletes all displayed logs.
When [Clear Log] (PF menu) is pressed, the screen changes and the
message “Clear log with PF2” appears. Press [Clear Log] (PF menu) to
clear the log.
――
Print Prints the diagnosis log to a Chromatopac.
――
NOTE
To Next Page
Loading...
