Shimadzu GC-2014 Instruction Manual

14 Diagnosis
14.3 Analysis Counter
189
GC-2014
14.3.2 Parameter list
AOC WAIT
Selection: Yes/No, Default: No
When the threshold is exceeded during batch processing, select “Yes” to temporarily pause,
the AOC operation when the analysis counter has exeed the limit.
USE COUNTER
Selection: Yes/No, Default: Yes
ANALYSIS COUNTER
Selection: 0
SETTING TO WARN
Range: 0−9999, Default: 100
The septum/glass insert replacement interval depends on the type of analysis. Periodically replace the
septum and the glass insert even if the warning message is not displayed.
14.3.3 PF menu
PF menu Description
Reference
section
Reset Resets analysis number counter of the current item.
――
Next Displays the setup screen of the analysis counter of another injection port.
――
NOTE

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)