Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.1 Time Scheduler
214
GC-2014
16.1.6 Creating a new time schedule
Select [New] (PF menu) from the time schedule screen to display the Time Schedule screen
shown in Fig. 16.1.5.
Set an item using the [△] and [▽] keys and [ENTER] key. When [Finish] (PF menu) appears
after you have set items, press [Finish] to validate the schedule.
In the upper half of the screen, the contents of the set schedule are displayed. In the lower
half of the screen, the schedule edit screen is displayed.
Up to 100 lines are available per schedule.
The schedule execution time range is from 00:00 to 23:59. The unit is 1 minute.
16.1.7 PF menu
Fig. 16.1.5 Creating a new schedule
PF menu Description
Reference
section
Finish Validates the time schedule.
――
Prev Page Returns to previous setup screen.
――
Next Page
Moves to next item.
The cursor can also be moved to next item by pressing [ENTER] key.
――
Cancel Cancels the time schedule currently being created.
――

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)