Shimadzu GC-2014 Instruction Manual

8 Setting the Analytical Parameters and File Management
8.2 File Management
97
GC-2014
8.2.5 Initializing a file
Select [File Init] (PF menu) on the file list screen to display the file initialization screen shown
in Fig. 8.2.4. Enter the file number or move the cursor to select the file. Then press [File Init]
(PF menu).
During File initialization, the file name and contents are deleted. The parameters return to
their default settings. Once a file is initializen, the action cannot be undone. The current file
cannot be initialized.
Fig. 8.2.4 Initializing a file

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)