Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.1 Time Scheduler
212
GC-2014
16.1.3 Setting the mode
Select “1. MODE” from the time scheduler menu to display the mode setup screen shown in
Fig. 16.1.2.
Select whether to use the same schedule every day or to use a different schedule on each
day of the week. Up to 8 schedules can be set with the time scheduler.
When the time scheduler is operating, the mode cannot be changed.
Q Schedule number and day of the week
The table below shows the relationship between the schedule number and the day of the
week.
Fig. 16.1.2 Mode setup screen
Mode 1
(schedule number)
Mode 2
(day)
No. 0 Sun.
No. 1 Mon.
No. 2 Tue.
No. 3 Wed.
No. 4 Thu.
No. 5 Fri.
No. 6 Sat.
No. 7
――
NOTE
The schedule number can
be set only when in Number
mode.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)