Shimadzu GC-2014 Instruction Manual

14 Diagnosis
14.4 Coolant Consumption Counter
191
GC-2014
14.4.2 Parameter list
USE COUNTER
Selection: Yes/No, Default : Yes
CONSUMPTION
Default: 0 min
The total time that the CRG is “On” is displayed.
Refer to “15.5 Setting the CRG Parameters”.
SETTING TO WARN
Range: 0−9999 min, Default : 100 min
The coolant consumption time depends on the gas cylinder volume and the number of analyses which
requier CRG. Set the warning time according to the analysis conditions.
14.4.3 PF menu
PF menu Description
Reference
section
Reset Resets the Use counter.
――
NOTE

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)