Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.3 Time Program
226
GC-2014
16.3.3 Creating a new time program
Select [New] (PF menu) from the time program screen to display the time program edit
screen shown in Fig. 16.3.2.
Set an item using the [ △ ] and [ ▽ ] keys and the [ENTER] key. When [Finish] (PF menu)
becomes available and the items have been set, press [Finish] to validate the program.
At the top of the screen, the contents of the set program are displayed. At the bottom of the
screen, the program edit screen is displayed.
Up to 100 lines are available for one program.
The possible program execution time ranges from 0.00 to 9999.00 minutes.
16.3.4 PF menu
Fig. 16.3.2 Time program edit screen
PF menu Description
Reference
section
Finish Validates the time program.
――
Prev Page Returns to previous setup screen.
――
Next Page Moves to next item.
――
Cancel Cancels the time program being created.
――

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)