1
1.1
1.1.
GC-2014
1 Installation
1.1Verification of Installation Location
Q Installation location requirements
Consider the following points to ensure safe and appropriate unit operation when selecting
the installation site.
1. Ambient temperature and humidity
For optimal performance, operate this unit within the following temperature and humidity
specifications.
Temperature range: 18 °C to 28 °C
Relative humidity range: 50 % to 60 % (Avoid use under conditions where
condensation forms)
Operating temperature range: 5 °C to 40 °C
Operating humidity range: 5 % to 90 % (Avoid use under conditions where con-
densation forms)
2. Installation location
Install the unit on a firm, stable and flat base.
(The GC-2014ATF model weighs approximately 50 kg.)
3. Corrosive gas and dust
Avoid exposure to corrosive gas and excessive dust to prolong the service life and maintain
optimal unit performance.
4. Electro-magnetic fields and power supply noise
This unit should not be used near strong electro-magnetic fields. The power supply must
have little or no noise. These items can cause instrument problems.
5. Other precautions
For optimal performance, avoid the following conditions during installation:
(1) Fluctuating ambient temperature.
(2) Temperature changes from heating or air conditioning.
(3) Direct sunlight.
(4) Vibrations.
To Next Page
Loading...
Need help?
General
