Shimadzu GC-2014 - Setting the AUX APC Parameters; Screen Description

205
15 Optional Devices
15.3
15.
GC-2014
15.3Setting the AUX APC Parameters
The pressure, the flow rate and the gas type can be set for the AUX APC.
15.3.1 Screen description
When the optional AUX APC is installed, press the [OPTION] key to display the screen
shown in Fig. 15.3.1. If a different screen appears, press the [OPTION] key again or [NEXT]
(PF menu) to display the correct screen.
The screen toggles among AOC parameters → AUX temperature → AUX APC → AUX AMC
→ CRG screens in this order.
Fig. 15.3.1 AUX APC main screen