Shimadzu GC-2014 - Direct Operation; Screen Description; Parameter List; PF Menu

16 Special Functions
16.5
16.
234
GC-2014
16.5Direct Operation
16.5.1 Screen description
Select “5. DIRECT OPERATION” from the [FUNC] key screen to display the screen shown
in Fig. 16.5.1.
Input the event No. and press the [Execute] key to execute the specified event.
For a description of the event No., refer to “17.4 Event No.”.
16.5.2 Parameter list
EVENT
Range: -500−+500, Default: ---
Runs the operation assigned to the event No.
Refer to “17.4 Event No.”.
16.5.3 PF menu
Fig. 16.5.1 Direct operation setup screen
PF menu Description
Reference
section
Execute
Runs the specified operation.
Input event No. to be run, and press [Execute] (PF menu).
――