Shimadzu GC-2014 - Event no

279
17 Printing
17.4
17.
GC-2014
17.4Event No.
Many parameters are printed with event No. The list below shows the correspondence of event
No. to functions.
Q Event No. list
No. Meaning of “Event xx” (Example: Event 1) Meaning of “Event-xx” (Example: Event -1)
0
Reverses contact status of Events 1 to 16 and
Events 91 to 96.
Opens contact of Events 1 to 16 and switches
contact of events 91 to 96 to N/C type (normal).
1
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
2
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
3
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
4
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
5
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
6
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
7
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
8
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
9
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
10
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
11
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
12
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
13
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
14
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
15
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
16
Turns on contact of one contact in one circuit
(option PRG).
Turns off contact of one contact in one circuit
(option PRG).
51 Performs zero adjustment of DET #1. Frees zero adjustment of DET #1.
52 Performs zero adjustment of DET #2. Frees zero adjustment of DET #2.
53 Performs zero adjustment of DET #3. Frees zero adjustment of DET #3.
54 Performs zero adjustment of DET #4. Frees zero adjustment of DET #4.
61
Turns on CAR1 gas saver.
Sets split ratio to value of CAR1 gas saver split
ratio 1.
Turns off CAR1 gas saver.
Returns split ratio to value of analysis
parameter.