6 Basic Key Operation
6.1 Keypad Description and Operation
69
GC-2014
6.1.2 Screen
The areas of the 16-line screen display a variety of items. These items are divided by lines
on the screen.
If all items cannot be displayed on one screen, “ △ ” and “ ▽ ” are displayed in the message
line. Scroll through the screen by moving the cursors.
Q [Return] (PF menu)
[Return] (PF menu) displayed in the PF menu line returns the display to the previous screen.
[Return] (PF menu) is displayed in PF1.
Q Actual and set values
Actual (current) values are highlighted, while set values are underlined. The actual value
blinks when it is NOT READY (the actual value has not reached the set value). When the
values are equal (READY status), the actual value stops blinking.
When the DINJ is used When the SPL is used
Fig. 6.1.1
When the DINJ is used When the SPL is used
Fig. 6.1.2
Displays the screen
title and the GC
status (“READY”,
“NOT READY
” or
“RUN
” etc.).
Displays a message
or error about the
operating procedure.
Displays the menu
selected by the [PF]
key.
Actual values Set values
Actual values Set values
To Next Page
Loading...
