Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.6 GC Configuration
236
GC-2014
TEMPERATURE OFFSET
Set the temperature offset for each heated zone.
OTHER CONFIGURATIONS
Specify the configuration of miscellaneous setup items.
16.6.3 Setting the date and time
16.6.3.1 Screen description
Select “6. GC CONFIGURATION” from the [FUNC] key screen, and then select “1.
DATE/TIME SETTING”, to display the Date/Time setting screen shown in Fig. 16.6.2.
The date and the time can be set. This setting is automatically saved, even when the
GC power is off.
16.6.3.2 Parameter list
DATE
Range: 2000.01.01−2099.12.31
TIME
Range: 00:00:00−23:59:59
Fig. 16.6.2 Date/time setup screen
The current date and time
are displayed.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)