Shimadzu GC-2014 Instruction Manual

181
14 Diagnosis
14.2
14.
GC-2014
14.2Log Reading Menu
14.2.1 Screen description
Select “2. LOG READING MENU” from the [DIAG] key main screen to display the Log Read-
ing Menu screen shown in Fig. 14.2.1.
14.2.2 Parameter list
GC OPERATION LOG
Displays the power On/Off log and the system On/Off log.
ANALYSIS LOG
Displays the analysis log. This log records whether analyses were finished and whether con-
trols deviated from their target valves.
PARAMETER LOG
Displays the key operation log and the parameter change log.
ERROR LOG
Displays the log of displayed error messages.
DIAGNOSTIC LOG
Displays the diagnosis log.
Fig. 14.2.1 Log reading menu main screen

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)