Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.2 Batch Schedule
223
GC-2014
16.2.6 PF menu
16.2.7 Editing a batch schedule
To change an existing batch processing schedule, move the cursor using the [ △ ] and [ ▽ ]
keys to the schedule to be edited and press the [ENTER] key. The schedule to be edited
appears on the edit screen.
To change the vial number, enter the new number from the edit screen and press [Finish]
(PFmenu).
To change the other parameters, move the cursor and make the change from the edit
screen, and then press [Finish] (PFmenu).
To cancel the edits and restore the original batch schedule, press [Cancel] (PFmenu) before
pressing [Finish](PFmenu).
PF menu Description
Reference
section
Finish Validates the schedule.
――
Prev Page Returns to previous setup screen.
――
Next Page Moves to setup screen for next item.
――
Cancel Cancels the schedule being created.
――

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)