Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.4 Pre-Run Program
233
GC-2014
16.4.6 Pre-Run Program set up example
Example: Switches B-contact of Event 91 four minutes in to the program.
Screen display
1. Time : 4.0 min
2. Relay
3. Relay
4. Switch point
5. Event 91, 92
6. Event 91
7. Point B
8. Setting is completed

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)