Shimadzu GC-2014 Instruction Manual

219
16 Special Functions
16.2
16.
GC-2014
16.2Batch Schedule
Use the batch schedule to continuously and automatically perform analyses.
A batch is useful for switching methods automatically during the analyses.
16.2.1 Screen description
Select “2. BATCH” from the [FUNC] key screen, the Batch screen shown in Fig. 16.2.1
appears.
Q AOC status
The AOC status is displayed on the Batch screen..
Fig. 16.2.1 Batch schedule screen
Screen display Description
Inactive AOC is not operating.
Taking vial Auto sampler arm is picking up a vial.
Preparation AOC is operating (before injection).
Rinse AOC is operating (after injection).
Putting vial Auto sampler arm is returning a vial to the
tray.
Wait AOC is waiting for analysis.
The AOC status is
displayed.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)