Shimadzu GC-2014 - Changing Item Names

6 Basic Key Operation
6.3 Basic Key Operations
75
GC-2014
6.3.5 Changing item names
Customize file names and other names with alphanumeric characters and symbols. Change
the name using the following procedure:
(1) Move the cursor to an item to be changed using the [ △ ] and [ ▽ ] keys.
(2) Move the cursor to a character to be changed using the [ ] and [ ] keys.
(3) Input a character as described in the following section on entering characters. The
character input procedure described below.
(4) Press the [ENTER] key to validate the input.
(5) Repeat steps (2) to (4) to enter a name.
(6) Press the [CE] key to delete one character at the cursor’s current position.
Fig. 6.3.5
△
△