Shimadzu GC-2014 Instruction Manual

6 Basic Key Operation
6.3 Basic Key Operations
76
GC-2014
Q Entering characters
Initially, the character input screen is in the upper case mode. Press [LowerChr] (PF menu)
to select the lower case mode. Press [NumerChr] (PF menu) to select the numeric mode.
Alphabetic mode (upper case/lower case)
Numeric mode
Press the [0] to [9] keys to input numbers “0” to “9”.
Press the [-] and [ ・ ] keys to toggle the symbols.
Key Toggled characters
1
A/a → B/b → C/c → A/a →・・・
2
D/d → E/e → F/f → F/f →・・・
3
G/g → H/h → I/i → G/g →・・・
4
J/j → K/k → L/l → J/j →・・・
5
M/m → N/n → O/o → M/m →・・・
6
P/p → Q/q → R/r → P/p →・・・
7
S/s → T/t → U/u → S/s →・・・
8
V/v → W/w → X/x → V/v →・・・
9
Y/y → Z/z → Y/y →・・・
0
0 → 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8 → 9 → 0 → ・・・
． (blank) → ．→ ，→ ＋ → － → ＊ → ／ → ＃ → ＄ → ％ → ＆ → (blank) →・ ・ ・
－＆ → ％ → ＄ → ＃ → ／ → ＊ → － → ＋ → ，→ ．→(blank) → ＆ →・・・

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)