Shimadzu GC-2014 Instruction Manual

14 Diagnosis
14.4
14.
190
GC-2014
14.4Coolant Consumption Counter
The coolant consumption display allows you to confirm the total time that the CRG has been “On”
(The CRG is an optional accessory.)
If the coolant consumption exceeds the time limit specified (setting to warn), a warning message
is displayed. Replace the gas supply.
14.4.1 Screen description
Select “4. COOLANT CONSUMPTION” from the [DIAG] key main screen to display the
Coolant consumption screen shown in Fig. 14.4.1.
Fig. 14.4.1 Coolant consumption sets screen screen

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)