Shimadzu GC-2014 Instruction Manual

14 Diagnosis
14.2 Log Reading Menu
184
GC-2014
(3) Analysis log details
On the analysis log main screen, use the cursor to select a log item with “∗” on the right
and press the [ENTER] key to display the screen shown in Fig. 14.2.4.
The screen provides details about each error when the monitored value deviated from
the set value, and for which an alarm or warning was issued during the analysis.
Fig. 14.2.4 Details screen

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)