SMC Networks TigerStack II SMC8848M

C ONFIGURING E VENT L OGGING
4-45
CLI – Enter the syslog server host IP address, choose the facility type and
set the logging trap.
Displaying Log Messages
Use the Logs page to scroll through the logged system and event messages.
The switch can store up to 2048 log entries in temporary random access
memory (RAM; i.e., memory flushed on power reset) and up to 4096
entries in permanent flash memory.
Web – Click System, Log, Logs.
Figure 4-20 Displaying Logs
Console(config)#logging host 10.1.0.9 20-36
Console(config)#logging facility 23 20-37
Console(config)#logging trap 4 20-38
Console(config)#logging trap
Console(config)#exit
Console#show logging trap 20-40
Syslog logging: Enabled
REMOTELOG status: Disabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Warning conditions
REMOTELOG server ip address: 10.1.0.9
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
Console#