SMC Networks TigerStack II SMC8848M

W EB S ERVER C OMMANDS
22-15
Example
show tacacs-server
This command displays the current settings for the TACACS+ server.
Default Setting
None
Command Mode
Privileged Exec
Example
Web Server Commands
This section describes commands used to configure web browser
management access to the switch.
Console(config)#tacacs-server key green
Console(config)#
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with TACACS server: *****
Server port number: 49
Console#
Table 22-7 Web Server Commands
Command Function Mode Page
ip http port Specifies the port to be used by the web
browser interface
GC 22-16
ip http server Allows the switch to be monitored or
configured from a browser
GC 22-16
ip http
secure-server
Enables HTTPS (HTTP/SSL) for encrypted
communications
GC 22-17
ip http secure-port Specifies the UDP port number for HTTPS GC 22-18