SMC Networks TigerStack II SMC8848M User Manual

E NTERING C OMMANDS
18-5
Showing Commands
If you enter a “?” at the command prompt, the system will display the first
level of keywords for the current command class (Normal Exec or
Privileged Exec) or configuration class (Global, ACL, DHCP, Interface,
Line, Router, VLAN Database, or MSTP). You can also display a list of
valid keywords for a specific command. For example, the command
“show ?” displays a list of possible show commands:
Console#show ?
access-group Access groups
access-list Access lists
arp Information of ARP cache
bridge-ext Bridge extend information
calendar Date information
class-map Display class maps
dns DNS information
dot1x Show 802.1x content
garp GARP property
gvrp Show GARP information of interface
history Information of history
hosts Host information
interfaces Information of interfaces
ip IP information
ipv6 IPv6 information
lacp Show LACP statistic
line TTY line information
log Login records
logging Show the contents of logging buffers
mac MAC access lists
mac-address-table Set configuration of the address table
management Show management IP filter
map Map priority
policy-map Display policy maps
port Characteristics of the port
protocol-vlan Protocol-VLAN information
public-key Show information of public key
pvlan Information of private VLAN
queue Information of priority queue
radius-server RADIUS server information
rip RIP
router Router
running-config The system configuration of running
snmp SNMP statistics
sntp SNTP
spanning-tree Specify spanning-tree
ssh Secure shell
startup-config The system configuration of starting up
system Information of system
tacacs-server Login by TACACS server
users Display information about terminal lines
version System hardware and software status
vlan Switch VLAN Virtual Interface
Console#show

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English