SMC Networks TigerStack II SMC8848M User Manual

B ASIC IP C ONFIGURATION
36-3
ipv6 address
link-local
Configures an IPv6 link-local address for
an interface and enables IPv6 on the
interface
IC 36-20
show ipv6 interface Displays the usability and configured
settings for IPv6 interfaces
NE,
PE
36-22
ipv6
default-gateway
Sets an IPv6 default gateway for traffic
with no known next hop
GC 36-24
show ipv6
default-gateway
Displays the current IPv6 default gateway NE,
PE
36-25
ipv6 mtu Sets the size of the maximum transmission
unit (MTU) for IPv6 packets sent on an
interface
IC 36-26
show ipv6 mtu Displays maximum transmission unit
(MTU) information for IPv6 interfaces
NE,
PE
36-27
show ipv6 traffic Displays statistics about IPv6 traffic NE,
PE
36-27
clear ipv6 traffic Resets IPv6 traffic counters PE 36-35
ping ipv6 Sends ICMP echo request packets to an
IPv6 node on the network
NE,
PE
36-36
Neighbor Discovery
ipv6 neighbor Configures a static entry in the IPv6
neighbor discovery cache
GC 36-38
ipv6 nd dad
attempts
Configures the number of consecutive
neighbor solicitation messages sent on an
interface during duplicate address
detection
IC 36-39
ipv6 nd ns interval Configures the interval between IPv6
neighbor solicitation retransmissions on an
interface
IC 36-41
show ipv6
neighbors
Displays information in the IPv6 neighbor
discovery cache
NE,
PE
36-43
clear ipv6 neighbors Deletes all dynamic entries in the IPv6
neighbor discovery cache
PE 36-44
Table 36-2 Basic IP Configuration Commands (Continued)
Command Function Mode Page

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English