Name: SMC Networks TigerStack II SMC8848M
Brand: SMC Networks
Rating: 4 (1 reviews)

To Next Page

To Previous Page

802.1X P

ORT

UTHENTICATION

22-41

• In “multi-host” mode, only one host connected to a port needs to pass

authentication for all other hosts to be granted network access.

Similarly, a port can become unauthorized for all hosts if one attached

host fails re-authentication or sends an EAPOL logoff message.

Example

dot1x re-authenticate

This command forces re-authentication on all ports or a specific interface.

Syntax

dot1x re-authenticate [interface]

interface

ethernet unit/port

- unit - Stack unit. (Range: 1-8)

- port - Port number. (Range: 1-26/50)

Command Mode

Privileged Exec

Command Usage

The re-authentication process verifies the connected client’s user ID

and password on the RADIUS server. During re-authentication, the

client remains connected the network and the process is handled

transparently by the dot1x client software. Only if re-authentication

fails is the port blocked.

Example

Console(config)#interface eth 1/2

Console(config-if)#dot1x operation-mode multi-host max-count 10

Console(config-if)#

Console#dot1x re-authenticate

Console#

Other manuals for SMC Networks TigerStack II SMC8848M

Questions and Answers:

Need help?

Do you have a question about the SMC Networks TigerStack II SMC8848M and is the answer not in the manual?

General