SMC Networks TigerStack II SMC8848M User Manual

IP V 6 ACL S
23-9
show ip access-group
This command shows the ports assigned to IPv4 ACLs.
Command Mode
Privileged Exec
Example
Related Commands
ip access-group (23-8)
IPv6 ACLs
The commands in this section configure ACLs based on IPv6 addresses,
next header type, and flow label. To configure IPv6 ACLs, first create an
access list containing the required permit or deny rules, and then bind the
access list to one or more ports
Console#show ip access-group
Interface ethernet 1/2
IP standard access-list david
Console#
Table 23-3 IPv6 ACL Commands
Command Function Mode Page
access-list ipv6 Creates an IPv6 ACL and enters
configuration mode for standard or
extended IPv6 ACLs
GC 23-10
permit, deny
Filters packets matching a specified
source IPv6 address
IPv6-
STD-ACL
23-11
permit, deny Filters packets meeting the specified
criteria, including destination IPv6
address, next header type, and flow
label
IPv6-
EXT-ACL
23-12
show ipv6
access-list
Displays the rules for configured IPv6
ACLs
PE 23-14
ipv6 access-group Adds a port to an IPv6 ACL IC 23-15
show ipv6
access-group
Shows port assignments for IPv6
ACLs
PE 23-16

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English