EasyManuals Logo

SMC Networks TigerStack II SMC8848M User Manual

SMC Networks TigerStack II SMC8848M
846 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #487 background image
SNMP
-
SERVER
CONTACT
21-5
snmp-server contact
This command sets the system contact string. Use the no form to remove
the system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server location (21-5)
snmp-server location
This command sets the system location string. Use the no form to remove
the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Console(config)#snmp-server contact Paul
Console(config)#

Table of Contents

Other manuals for SMC Networks TigerStack II SMC8848M

Preview: Installation Guide
Installation Guide96 pages

Questions and Answers:

SMC Networks TigerStack II SMC8848M Specifications

General IconGeneral
Device TypeSwitch
ManageableYes
StackableYes
Switching Capacity17.6 Gbps
Forwarding Rate13.1 Mpps
MAC Address Table Size8K entries
Jumbo Frame SupportYes
Form FactorRack-mountable
Uplink Ports4 x Gigabit SFP
Layer2
Power Supply100-240V AC, 50-60Hz
Dimensions17.3 x 1.7 in
Operating Temperature0°C to 40°C
Storage Temperature-4 °F to 158 °F (-20 °C to 70 °C)
Humidity10% to 90% (non-condensing)

Related product manuals