SMC Networks TigerStack II SMC8848M

DHCP S ERVER
35-11
Example
domain-name
This command specifies the domain name for a DHCP client. Use the no
form to remove the domain name.
Syntax
domain-name domain
no domain-name
domain - Specifies the domain name of the client.
(Range: 1-32 characters)
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
dns-server
This command specifies the Domain Name System (DNS) IP servers
available to a DHCP client. Use the no form to remove the DNS server
list.
Syntax
dns-server address1 [address2]
no dns-server
• address1 - Specifies the IP address of the primary DNS server.
• address2 - Specifies the IP address of the alternate DNS server.
Default Setting
None
Console(config-dhcp)#default-router 10.1.0.54 10.1.0.64
Console(config-dhcp)#
Console(config-dhcp)#domain-name sample.com
Console(config-dhcp)#