SMC Networks TigerStack II SMC8848M User Manual

U SER A UTHENTICATION C OMMANDS
22-26
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response
from the client during the SSH negotiation phase. Once an SSH session
has been established, the timeout for user input is controlled by the
exec-timeout command for vty sessions.
Example
Related Commands
exec-timeout (20-26)
show ip ssh (22-31)
ip ssh authentication-retries
This command configures the number of times the SSH server attempts to
reauthenticate a user. Use the no form to restore the default setting.
Syntax
ip ssh authentication-retries count
no ip ssh authentication-retries
count – The number of authentication attempts permitted after
which the interface is reset. (Range: 1-5)
Default Setting
3
Command Mode
Global Configuration
Console(config)#ip ssh timeout 60
Console(config)#

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English