SMC Networks TigerStack II SMC8848M User Manual

B ASIC M ANAGEMENT T ASKS
4-10
Manual Configuration
Web – Click IP, General, Routing Interface. Select the VLAN through
which the management station is attached, set the IP Address Mode to
“Static,” and specify a “Primary” interface. Enter the IP address, and
subnet mask, then click Apply.
Figure 4-4 IPv4 Interface Configuration - Manual
Click IP, Global Setting. If this stack and management stations exist on
other network segments, then specify the default gateway, and click Apply.
Figure 4-5 Default Gateway

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English