B
ASIC
IP C
ONFIGURATION
36-35
clear ipv6 traffic
This command resets IPv6 traffic counters.
Command Mode
Privileged Exec
Command Usage
This command resets all of the counters displayed by the show ipv6
traffic command.
neighbor solicit The number of ICMP Neighbor Solicitation messages sent by
the interface.
neighbor advert The number of ICMP Neighbor Advertisement messages sent
by the interface.
UDP Statistics
input
The total number of UDP datagrams delivered to UDP users.
checksum errors The total number of UDP packet checksum errors.
length errors The total number of UDP header length errors.
no port The total number of received UDP datagrams for which there
was no application at the destination port.
dropped The number of times the system encounter an error when
trying to queue the received packet.
output The total number of UDP datagrams sent from this entity.
TCP Statistics
input
The total number of segments received, including those received in error.
This count includes segments received on currently established
connections.
checksum errors The total number of TCP packet checksum errors.
output The total number of segments sent, including those on current
connections but excluding those containing only retransmitted
octets.
retransmitted The total number of segments retransmitted - that is, the
number of TCP segments transmitted containing one or more
previously transmitted octets.
Table 36-5 show ipv6 traffic - display description (Continued)
Field Description
To Next Page
Loading...
