SMC Networks TigerStack II SMC8848M User Manual

D OMAIN N AME S ERVICE
15-2
• When more than one name server is specified, the servers are queried in
the specified sequence until a response is received, or the end of the list
is reached with no response.
• Note that if all name servers are deleted, DNS will automatically be
disabled.
Command Attributes
• Domain Lookup Status – Enables DNS host name-to-address
translation.
• Default Domain Name
18
– Defines the default domain name
appended to incomplete host names. (Range: 1-64 alphanumeric
characters)
• Domain Name List
18
– Defines a list of domain names that can be
appended to incomplete host names. (Range: 1-64 alphanumeric
characters. 1-5 names)
• Name Server List – Specifies the address of one or more domain name
servers to use for name-to-address resolution. (Range: 1-6 IP addresses)
18. Do not include the initial dot that separates the host name from the domain name.

SMC Networks TigerStack II SMC8848M Specifications

General

Device Type	Switch
Manageable	Yes
Stackable	Yes
Switching Capacity	17.6 Gbps
Forwarding Rate	13.1 Mpps
MAC Address Table Size	8K entries
Jumbo Frame Support	Yes
Form Factor	Rack-mountable
Uplink Ports	4 x Gigabit SFP
Layer	2
Power Supply	100-240V AC, 50-60Hz
Dimensions	17.3 x 1.7 in
Operating Temperature	0°C to 40°C
Storage Temperature	-4 °F to 158 °F (-20 °C to 70 °C)
Humidity	10% to 90% (non-condensing)