SMC Networks TigerStack II SMC8848M User Manual

C ONFIGURING THE S WITCH
3-6
Main Menu
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions.
The following table briefly describes the selections available from this
program.
Table 3-2 Switch Main Menu
Menu Description Page
System 4-1
System Information Provides basic system description, including
contact information
4-1
Switch Information Shows the number of ports, hardware/
firmware version numbers, and power status
4-4
Bridge Extension Shows the bridge extension parameters 4-6
IPv6 Configuration Configures IPv6 interface addresses and static
neighbors
4-13
IPv6 Configuration Configures IPv6 interface address and
protocol settings
4-13
IPv6 General Prefix Configures IPv6 general prefix for network
portion of addresses
4-22
IPv6 Neighbor Configures IPv6 neighbor discover protocol
and static neighbors
4-24
Jumbo Frames Enables support for jumbo frames 4-13
File Management 4-29
Copy Operation Allows the transfer and copying files 4-30
Delete Allows deletion of files from the flash
memory
4-30
Set Startup Sets the startup file 4-30
Line 4-36
Console Sets console port connection parameters 4-36
Telnet Sets Telnet connection parameters 4-38

SMC Networks TigerStack II SMC8848M Specifications

General

Brand	SMC Networks
Model	TigerStack II SMC8848M
Category	Switch
Language	English