SMC Networks TigerStack II SMC8848M - Switch Renumber

D EVICE D ESIGNATION C OMMANDS
20-3
switch renumber
This command resets the switch unit identification numbers in the stack.
All stack members are numbered sequentially starting from the top unit for
a non-loop stack, or starting from the Master unit for a looped stack.
Syntax
switch all renumber
Default Setting
• For non-loop stacking, the top unit is unit 1.
• For loop stacking, the master unit is unit 1.
Command Mode
Global Configuration
Example
This example shows how to renumber all units.
Console#switch all renumber
Console#