SMC Networks TigerStack II SMC8848M

S YSTEM M ANAGEMENT C OMMANDS
20-36
Default Setting
• Flash: errors (level 3 - 0)
• RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
The message level specified for flash memory must be a higher priority
(i.e., numerically lower) than that specified for RAM.
Example
logging host
This command adds a syslog server host IP address that will receive
logging messages. Use the no form to remove a syslog server host.
Syntax
[no] logging host host_ip_address
host_ip_address - The IP address of a syslog server.
4 warnings Warning conditions (e.g., return false,
unexpected return)
3 errors Error conditions (e.g., invalid input, default
used)
2 critical Critical conditions (e.g., memory allocation, or
free memory error - resource exhausted)
1 alerts Immediate action needed
0 emergencies System unusable
Console(config)#logging history ram 0
Console(config)#
Table 20-9 Logging Levels (Continued)
Level Severity Name Description
* There are only Level 2, 5 and 6 error messages for the current firmware release.