SMC Networks TigerStack II SMC8848M

F ILE M ANAGEMENT C OMMANDS
20-19
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered
up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot
command. See the table under the dir command for a description of the
file information displayed by this command.
Console#dir
File name File type Startup Size
(byte)
------------------------------------- -------------- ------- ----------
Unit1:
D1001 Boot-Rom Image Y 1531028
V330754 Operation Code Y 4408104
Factory_Default_Config.cfg Config File N 455
startup Config File Y 3649
startup1.cfg Config File N 3649
---------------------------------------------------------------------------
Total free space: 25690112
Console#
Console#whichboot
File name File type Startup Size (byte)
-------------------------------- -------------- ------- -----------
Unit1:
D1001 Boot-Rom Image Y 1531028
V330754 Operation Code Y 4408104
startup Config File Y 3649
Console#